There is no direct way to access someone’s search history – even if they are connected to your home router. That said, you can set up your router to log a user’s browser history. In this guide, we’ll show you how you can do just that.
- Can't Find Synology On Network
- Connect Synology To Mac
- Find Synology Network
- How To Find Mac Address For Synology Router Ip
- Synology Get Mac Address
However, collecting data such as someone’s browsing history is a violation of their privacy. You should avoid accessing other people’s private browsing history and confine this method to legitimate uses such as monitoring your child’s internet usage, or your own.
The Advantages Of Router Tracking
MAC is acronym for Media Access Control address. It is a unique identifier attached to almost most all networking equipment such as Routers, Ethernet cards, Switches/Hubs and other devices. If you do not have access to router admin interface (via telnet or webbased gui), use the following method to find out router MAC address. Synology Router RT2600ac. Blazing-fast Wi-Fi with up to 2.53Gbps combined wireless bandwidth to supercharge your Internet experience. RT2600ac is a powerful wireless router for homes and small offices seeking to understand, control, and secure their network.
- 1: Change the IP of New Router to Match the Old Router. Login to the new router from web address 192.168.250.1. Change the LAN IP for the new router Antbang to be 192.168.0.1 from its default 192.168.250.1. This is to enable the Synology device to be detectable on this new network. 2: Change the IP for Synology to Match the New Router.
- Synology Router Manager (SRM) Synology Router Manager (SRM) Anywhere Access to SRM: Synology QuickConnect & Dynamic DNS (DDNS) Synology QuickConnect & Dynamic DNS (DDNS) Security: Firewall/SPI Firewall, DoS Protection, VPN Pass-through (PPTP, IPSec, L2TP), Auto block, SSL certificate, Security Advisor, two-factor authentication.
There is third-party software that uses parental control to track a family member’s browsing activity. However, any tech-savvy individual can discover workarounds with a simple Google search. Even worse, some of these tools have to be installed on the target computer.
Typora for mac. But by monitoring user activity through your router, you can be a bit more discreet about it. It is also harder to remove by the computer user.
Your router stores all sites users visit – even ones that were accessed through Incognito Mode.
How To Access Your Router Settings
For this to work, you need to be able to enter your router settings page. You will need to know your IP address to proceed.
- To find out your IP address, open Run and type CMD. Click OK.
- Type IPCONFIG /ALL. Let Command Prompt execute the command.
- Scroll down the results to Default Gateway.
- The string of numbers parallel with Default Gateway is your IP address. Copy that value and paste it in any web browser. If you are connected to your browser, this would open your router settings.
Enter Your Login Credentials
A lot of people, surprisingly, have no clue what their login credentials are. Chances are, your router was set up by someone else. But there’s no need to worry. We’ll show you how to access your router settings.
All routers come with documentation, including the default values for both username and password. But if you no longer have that in your possession, you can try logging in using the most common default router credentials:
If that doesn’t work, you can always check online. With some luck, you’ll find the default credentials for your specific wireless router brand and model.
However, it’s possible that your router had been configured before and that the login had been changed to something else. In that case, you can reset your router to bring it back to its default settings. Resetting your router means you’ll have to reconfigure the SSID and password.
If you’re still using the default router username and password, you should take this opportunity to update it to something more secure. Once you have your login credentials, log into your router settings page.
See User Activity
Router settings vary depending on your router’s brand. However, most routers have a feature called Logs. Plantronics c320 m driver windows 10. This feature lists down all the IP addresses that are connected to your router. This is also where all browsing activity is stored.
Before you check the logs, you should know the target device’s IP address.
Go to Attached Devices. This feature may go by a different name on your device. But basically, you’re looking for a page that displays all the IP addresses of connected devices.
Once you figure out which one belongs to your target, list it down for the time being. You will be referring to it later on.
Now, click Logs to display all the sites that were visited while connected to your router.
You’ll be presented a list of domains or destination IPs along with the IP address of the user. Use your target’s IP address to track their internet activity.
The Log is disabled by default. To track user activity, you must first enable the feature.
In Wi-Fi Connect > Wireless, you can configure and fine-tune your Wi-Fi settings, or set the security level of your network with WPS. You can also use MAC filter to specify which MAC addresses are permitted to access the wireless network, allowing you to block or grant access to specific devices.
Contents
- Configure Wi-Fi settings
- Enable WPS
- Configure MAC filter rules
- Set up your wireless repeater
Configure Wi-Fi settings
This section explains how to enable and manage Wi-Fi settings of your Synology Router. You can also enable a wireless network schedule which allows you to control when the wireless network of your Synology Router is active and accessible.
To set up Smart Connect for your Synology Router:
With Synology Smart Connect powered by SRM, you can connect your devices to the combined SSID with the shared Wi-Fi settings for 2.4GHz and 5GHz bands. SRM will determine whether to switch between the two bands according to your specified conditions to ensure the best wireless connectivity for your devices.
- Go to Wi-Fi Connect > Wireless > Wi-Fi.
- Under the Smart Connect section, switch on 2.4GHz/5GHz auto selection.
- Tick the Enable wireless radio checkbox.
- Manage the following settings:
- Scheme: Determine the conditions to switch between the 2.4GHz and 5GHz Wi-Fi bands. For detailed steps, please refer to the Smart Connect Settings section below.
- Name (SSID): Enter a name for the Synology Smart Connect wireless network. You can choose to show/hide your SSID from the drop-down menu on the right.
- Security Level: Select one of the following security protocols from the Security Level drop-down menu:
- None
- WEP: A basic security protocol that requires users to enter a password to access the wireless network, but provides minimal protection.
- WPA/WPA2-Personal: Requires users to enter a password to access the wireless network, and is more secure than WEP.
- WPA/WPA2-Enterprise: A security protocol designed for enterprises, which requires authenticating users with an external authentication server.
- Opportunistic Wireless Encryption (OWE): Does not require a password but provides better protection.
- WPA3-Personal: Requires users to enter a password to access the wireless network, and is more secure than WPA2.
- WPA3-Enterprise: A security protocol designed for enterprises, which requires user authentication with an external server.
- WPA2/WPA3-Personal: Configure the client automatically for the correct security encryption. Requires users to enter a password to access the wireless network, and is more secure than WPA2.
- Password:Enter the password for your wireless network.
- 5GHz Channel/2.4GHz Channel: Select a frequency for each Wi-Fi band. For better perfomance, try to select a frequency different from the ones used by nearby networks.
Smart Connect Settings
Select one of the following schemes from the Scheme drop-down list:
- Auto: Select this option to automatically determine whether to switch to another Wi-Fi band according to the overall status of the bands to which the devices have connected.
- Custom: Select this option to customize the conditions for the connected devices to switch to another Wi-Fi band. If you select this option, you can click Edit on the right to launch the Edit Smart Connect Settings window, in which you can specify the conditions to trigger the automatic switch of Wi-Fi bands:
- Enable signal strength-oriented scheme: Tick this checkbox to configure the conditions for auto-determining whether to switch to another Wi-Fi band according to the signal strength (RSSI) of the bands to which the devices have connected.
If the signal strength of the band to which a device is connected goes beyond or below your specified values, the device will be automatically switched to the other band. - Enable network balance-oriented scheme: Tick this checkbox to configure the conditions for auto-determining whether to switch to another Wi-Fi band according to the network usage of the bands to which the devices have connected.
If the network usage of the band to which a device is connected goes beyond your specified percentage, the device will be automatically switched to the other band to balance the network traffic.
- Enable signal strength-oriented scheme: Tick this checkbox to configure the conditions for auto-determining whether to switch to another Wi-Fi band according to the signal strength (RSSI) of the bands to which the devices have connected.
Note:
- When the Smart Connect feature is switched on, the individual settings of 2.4GHz and 5GHz Wi-Fi bands will not be configurable.
To configure Wi-Fi settings for your Synology Router:
Aside from Synology Smart Connect, you can also set up your Wi-Fi network with separate SSIDs for each band (2.4GHz/5GHz).
- Go to Wi-Fi Connect > Wireless > Wi-Fi.
- Tick Enable wireless radio under any of 5GHz and 2.4GHz sections.
- 5GHz: This band is less likely to encounter interference from other wireless devices but its network range is shorter than that of 2.4GHz. Also, some wireless devices do not support this band.
- 2.4GHz: This is the band that most wireless devices use, and is therefore subject to more interference. However, its network range is broader than that of 5GHz and devices can be connected at a greater distance.
- Manage the following settings:
- Name (SSID): Enter a name for the wireless network. You can choose to show/hide your SSID from the drop-down menu on the right.
- Security Level: Select one of the following security protocols from the Security Level drop-down menu:
- None
- WEP: A basic security protocol that requires users to enter a password to access the wireless network, but provides minimal protection.
- WPA/WPA2-Personal: Requires users to enter a password to access the wireless network, and is more secure than WEP.
- WPA/WPA2-Enterprise: A security protocol designed for enterprises, which requires authenticating users with an external authentication server.
- Opportunistic Wireless Encryption (OWE): Does not require a password but provides better protection.
- WPA3-Personal: Requires users to enter a password to access the wireless network, and is more secure than WPA2.
- WPA3-Enterprise: A security protocol designed for enterprises, which requires user authentication with an external server.
- WPA2/WPA3-Personal: Configure the client automatically for the correct security encryption. Requires users to enter a password to access the wireless network, and is more secure than WPA2.
- Password:Enter the password for your wireless network.
- Wireless mode: Select a wireless standard. Each standard supports various bandwidths and frequencies.
- Channel: Select a frequency for this Wi-Fi band. For better performance, try to select a frequency different from the ones used by nearby networks.
Note:
- When selecting a mixed security level (e.g., WPA/WPA2-Personal and WPA/WPA2-Enterprise), you cannot set up a fixed Wireless mode such as n (for 2.4GHz) or ac (for 5GHz).
- A virtual 5GHz wireless band will display on RT2600ac when a mesh network is established.
- When Synology Router is reset to default, the SSID will become 'Synology_[serial number]'.
To configure advanced Wi-Fi settings for your Synology Router:
- Key rotation: Enter the number of seconds between each key rotation.
- Channel width: Select a channel width.
Note: This option will become individual ones for different wireless bands when the Smart Connect feature is in use. - PMF support: Choose from Disabled, Enabled - Optional, or Enabled - Required to provide your device with the ability to modify internal settings to address configuration conditions.
- Transmit power: Choose a signal strength of the wireless network.
Note: This option is always set as High when the Synology product joins a mesh network. - DTIM: Specify the interval of synchronization between Synology Router and Wi-Fi clients.
- AMPDU: Enable this option so that multiple data to the same destination will be packed together. This helps enhance performance when there are many small packets.
- Extended NSS: Enable this option to allow devices that support NSS to maintain stable connection when the channel width is 160 MHz or 80 + 80 MHz.
- 802.11r: Enable this option for fast roaming between different Wi-Fi points.
- U-APSD: Enable this option to save power. Yet, we suggest disabling this option if Wi-Fi clients frequently get disconnected or fail to connect to your Synology Router.
- Allow auto-switch to DFS channels(available for 5GHz bands only): Enable Dynamic Frequency Selection (DFS) to reduce the chance of signal interference.
- AP isolation: Choose to enable or disable this feature to restrict clients connected to the Wi-Fi network from interacting with other connected devices.
- MU-MIMO(available for 5GHz bands only): Allow client devices to connect to the wireless network with MU-MIMO support.
- Disable smart connect for devices not supporting 802.11v: Stop monitoring devices that support 2.4GHz bands but do not support 802.11v under the Smart Connect mode.
- Regional Compatibility: Enable this option to attach country codes to packets so that the configuration can meet regulatory compliance in certain regions.
Note: If some of the devices cannot connect to your Synology Router but the others work well, try disabling this option to troubleshoot. - Multicast translation: Enable this option to translate multicast packets into unicast packets for better performance regarding streaming services.
Note: This option is always set as Enabled when the Synology product joins a mesh network.
To set up a wireless schedule:
- Expand Advanced Options and click the Set schedule button.
- On the schedule screen, you can configure when the wireless network will be active.
- Click the blue square and on the grid, select the days and time you wish to enable Wi-Fi.
- To disable Wi-Fi for certain times or days, select the white square and click your desired times on the grid.
- Click OK to save your settings.
Enable WPS
Wi-Fi Protected Setup is a standard promoted by the Wi-Fi Alliance to simplify wireless security settings for users. You can use a Push button or a PIN number to keep your Wi-Fi network safe.
To enable Wi-Fi Protected Setup:
- Go to Wi-Fi Connect > Wireless > WPS, and tick Enable WPS.
- Select whether to use a push button, AP PIN code, or client PIN code.
- Click Apply to save your settings.
Can't Find Synology On Network
Configure MAC filter rules
Use MAC filter to control whether MAC addresses (or specific devices) have access to the wireless network. This feature only controls network access, not other encryption settings.
To create MAC filter rules:
![For For](https://guizishanren.com/images/20180210_scrape_music_05.jpg)
- Go to Wi-Fi Connect > MAC filter.
- Click the Create button and enter the description and MAC address of a device.
- Select an access policy:
- Deny MAC addresses in the list: Restricts the specified MAC address from accessing the wireless network.
- Only allow MAC address in the list: Restricts all the access to the wireless network except for the specified MAC address.
- Determine whether to Apply rules to guest network or not.
- Click Create and enter the Description and MAC address.
- Click OK to save your settings.
Set up your wireless repeater
Connect Synology To Mac
This section explains how to set up Repeater settings of your Synology Router. We recommend setting up all available Wi-Fi bands to obtain the best throughput.
Find Synology Network
To connect a wireless band to the corresponding one of a parent access point:
How To Find Mac Address For Synology Router Ip
- Go to Network Center > Operation Modes.
- Select Wireless Repeater. For more information on operation modes, please refer to this article.
Note:
Synology Get Mac Address
- The Repeater feature is available on SRM 1.1.4 and above.
- All the Wi-Fi bands of your repeater must be wirelessly connected to one or more Wi-Fi points within the same local network.
- Before the setup, make sure the Ethernet cable between this Synology Router and the target parental Wi-Fi point has been removed.